|
Specification
|
|
Operating voltage
|
DC 11~18 volts
|
|
Idling current
|
approx. 100mA
|
|
Charge/discharge power
|
max. 150/30W
|
|
NiCd/MH
|
1~27 cells
|
|
Li-ion/polymer
|
1~8 series
|
|
Pb
|
2~12/24V
|
|
Charge current
|
0.1 to 7.0A
|
|
Discharg current
|
0.1 to 5.0A
|
|
No. of cycle
|
1 to 5 times
|
|
Battery data memory
|
up to 10 data
|
|
Weight
|
570g
|
|
Dimension
|
160x120x40 mm
|
|
User's setting-up parameters
|
|
Lithium battery voltage type
|
3.6 or 3.7 volt per cell
|
|
NiCd Delta-peak voltage sensitivity
|
1 to 15mV
|
|
NiMH Delta-peak voltage sensitivity
|
1 to 15mV
|
|
Battery temperature cut-off
|
20 to 80C or OFF
|
|
Waste time between charge/discharge
|
1 to 60 min.
|
|
Trickle charge mode
|
ON/OFF
|
|
Integral timer limit for safety
|
10 to 720 min.or OFF
|
|
Maximum charging capacity limit for safety
|
10 to 9990mAh or OFF
|
|
Key beep and buzzer sound
|
ON/OFF
|
|
Input power low alert
|
10 to 11V
|
|
LCD back-light brightness
|
1 to 100 steps
|
- USB port
We provide the program analyze the charge/discharge process at your PC
- Individual voltage monitoring port
701 can monitor the voltage of each cell up to 8 cells of NiCd, NiMH or Li-poly battery being charged during charge/discharge process.
If the voltage of a peculiar cell raises or drops other than normal by any reason the process will be terminated forcibly for safety reason.
At the end of abnormal finishing process, you can read the voltage of the cell at the display with an error message.
You can pick out the bad cell of the battery pack.
This program does not have the voltage balancing function.
- Temperature sensor
The processor monitors the temperature of the battery being charged or discharged during the process
For safety reason, the charger can stop the process at high temperature by your set up
- Intelligent cooling fan
Side-mounted cooling fan operates only when internal temperature of the charger raises